RATES SCHEDULE
3-4 TONNE
*8 hr minimum charge on
machine hire
- Buckets (Standard Hire)$90/hr
- Ripper or grab or camp Wheel $7/hr
- Hammer or Augers $30/hr
- Rock Saw (min 4hrs) $70/hr
- Float each way $250 Metro
- Stand-down rate/day $650
5 TONNE
*8 hr minimum charge on
machine hire
- Buckets (Standard Hire)$95/hr
- Ripper or rockgrab or comp wheel $10/hr
- Hammer $40/hr
- Rock Saw (min 4hrs)$80/hr
- Float each way $299
- Stand-down rate/day $699
12-14TONNE
*8 hr minimum charge on
machine hire
- Buckets (Standard Hire) $130/hr
- Ripper or rock grab $10/hr
- Hammer $55/hr
- Rock Saw (min 4hrs) $100/hr
- Float each way $650 metro each way
- Stand-down rate/day $799
POSITRACK
*8 hr minimum charge on
machine hire
- Medium cat Positrack $110/hr
- With any excavator hire get Posi for $500 per week same operator.
- Float each way $300
- Stand-down rate/day $570-$810
kobelco 0/8 tonne
Rate $90/hr 5
- Hammer $30/hr
- Auger $20/hr
- Rocksaw $120/hr
- Float $99
AVAILABLE ATTACHMENTS
Price on Application
Skid Steer Auger Drive
Skid Steer Chain Trencher
Skid Steer Bucket Broom
Skid Steer Pallet Forks
Skid Steer Rock Breaker
Steel Shearers
Trench Compactor
Twin Header
Rock Saw
Grid Bucket
Auger
Grapples
Ripper
Concrete Pulverisor
Hydraulic Hammer
Bucket Screen
Tilt Flat Bucket
Hydraulic Compactor Plate
- Rates are effective as of January 2020 – June 2020.
- All prices do NOT include GST and are subject to change with out notice.
- Floats may vary depending on locations.
- It is solely the customer’s responsibility to cancel due to wet weather in advance an 8-hour minimum will apply if the machine or truck is not canceled 2 hours prior to commencement.
- Any machine or truck that cannot be parked securely onsite over night will be floated out at the end of each day at the customer’s expense.
- Any cancellations not due to wet weather must be informed 12 hours notice before commencement time.
- Public holidays, Sundays & night work are charged at a penalty rate.
- A Daily docket is to be signed by the customer at the end of each day.
- POA stands for Price on application.
- AFD stands for after first day.
- Any attachments needed that were not floated out at the same time as the machine have an additional float charge of $250 + GST.
- Hammer, Auger & Rock Saw attachments have a minimum of 4 hours per day.
- All machines on the 1st day of the job have a minimum 8 hours.
